resione Official: Instagram, X, Facebook | Linktree

Making 3D printing technology more practical

Click here to download the instruction manual Click here to download the settings Upgrade Notice Based on the medium gray version of TH72 resin, we have introduced two new colors: matte gray and white. These new colors of TH72 are easier to clean than the medium gray version, do not have a shiny, reflective, or sticky surface, and have a matte finish. They are also more resistant to yellowing. Additionally, their other properties are the same as the medium gray version. TH72 is a long-term tough resin, so you don't have to be careful when you play with prints, and it will not be easily damaged during long distance transportation. It is an ideal material for printing hair, capes, swords, etc., as well as static figures and models with hollow interiors, it can also be used as a toughening agent for other resins. ▌ Attention The model with thin and less support was successfully printed with resins with good rigidity (such as standard resin, rigid resin, ABS resin, etc.), but it might will failed to print with TH72 resin instead. It's recommended when printing with TH72 resin after the following treatment: a) Add more supports at the island of the model; b) The higher the supports, the larger the middle diamete; c) The heavier the model, the thicker the supports. The resin prints will be fragile after post-curing. It is not recommended to apply force to the prints immediately. Just need to wait for a while until the internal stress of the prints is completely released. ▌ Reviews Gnomes Paintshop Youtube: それつくちゃんねる / SoreTsuku bilibili: up鹏up Youtube: べにやのVlog Youtube: Primogenitor Prints Youtube: 3D Print BJD Wear Resistant Joints - RESIONE TH72 & M70 Resin Review--By Helene Holz Youtube: TH72 & Siraya tech Fast--Nathan Kozuch ▌ Certification RoHS ▌ Descriptions The prints are not easily damaged TH72 prints can withstand accidental accidental drops, and it will not be easily damaged during long distance transportation. You can significantly bend or even fold prints with a wall thickness of less than 3mm. It is ideal for printing durable figurines and miniatures. Long-lasting toughness TH72 prints will not become brittle over time. After a long time of outdoor environment test in subtropical summer (dozens of days of sunshine and rainy weather) and 8-hour high temperature drying at 50-60 ℃, the prints still maintain toughness and strength, the weather resistance is good. Very low water absorption With a water absorption rate (48hr) of 0.6%, TH72 performs exceptionally well among 3D printer resins. This ensures that prints do not soften due to increased air humidity or crack from long-term moisture absorption. The prints can be used in short-term underwater operations and outdoor scenarios. As a toughening agent for other resins Tests have shown that adding TH72 to rigid/standard resins significantly increases their toughness when TH72 constitutes 40% of the mixed resin, while maintaining sufficient strength. ▌ Cleaning and Post-curing Cleaning tools: Manual cleaning or 2 in 1 Wash Cure Machine Cleaning time: ≤5mins Cleaning solvent: 95% Ethanol or IPA Post-curing light source: 385-405nm UV(40W) Post-curing time: 15-30mins ▌ Compatible 3D Printer All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 385-410nm LCD resin 3D printer All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer ▌ Material performance parameters METHOD DATA Viscosity(25℃)(mpa.s) ASTM:D4212-10 516 Liquid density(g/cm³) ASTM:D4052-22 1.112 Solid density(g/cm³) ASTM:D792-20 1.198 Shore Hardness(D) ASTM:D2240-05 75 Tensile Strength(MPa) ASTM: D638-14 26.23 Tensile Modulus(MPa) ASTM: D638-14 541 Elongation at Break ASTM: D638-14 29.35% Flexural Strength(MPa) ASTM: D790-10 16.9 Flexural Modulus(MPa) ASTM: D790-10 556 Notched IZOD(J/m) ASTM:D256-10 27 Water Absorption（24hr） ASTM:D570-22 0.69%

Net weight

TH72 Long-lasting Non-brittle Resin (1kg)

1000g(Medium gray)

1000g(Matte gray)**new**

1000g(White)**new**

https://cdn.shopify.com/s/files/1/0464/1033/4360/files/HT100_resin_instruction.pdf?v=1641Take a look at the upgraded version of K resin: K+ Click here to download the instruction manual Click here to download the settings K resin is known for its excellent toughness and rigidity. This black material is not prone to overexposure under strong light sources, ensuring accurate size and sharp details. The mechanical properties of the printed parts are comparable to tough thermoplastics, allowing holes to be drilled, screws to inserted, and other high stress modifications, making it ideal for producing functional parts that will experience long term static load, transient stress or strain, but it is not suitable for underwater applications. ▌ Descriptions Mixed with F69/F39/F39T Tough resin K/M58/M68/G217 can be mixed with F69/F39/F39T resin, which can make the printed parts tougher, more durable, and not brittle for a long time Good toughness and rigidity The mechanical properties of the K resin prints are similar to tough thermoplastic materials, with high tensile strength and excellent impact strength. The prints can be machined repeatedly Precise size and sharp details This material is not easy to overexpose even under strong light source, the printed parts are accurate in size. Any 3d data can be accurately restored Black color is high in saturation The black color is high in saturation, which makes prints have a good texture, and it looks more like an injection molded product after polishing High-quality raw materials RESlONE prioritizes user care over cost considerations, selecting high-purity, low-irritation premium raw materials from around the world ▌ Reviews Youtube:ももジイChannel Impresion3daily Youtube: 3D-MPL Youtube: Тестирование фотополимерной смолы RESIONE K--By Федор Бихе ▌ Applications Functional parts Snap-fit designs Jigs and fixtures Assembly parts Protective shell Miniatures Toy figures ▌ Compatible 3D Printer All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 385-410nm LCD resin 3D printer All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer ▌ Material performance parameters METHOD DATA Viscosity(25℃)(mpa.s) ASTM:D4212-10 335 Liquid density(g/cm³) ASTM:D4052-22 1.122 Solid density(g/cm³) ASTM:D792-20 1.197 Shore Hardness(D) ASTM:D2240-05 83 Tensile Strength(MPa) ASTM: D638-14 45 Tensile Modulus(MPa) ASTM: D638-14 1512 Elongation at Break ASTM: D638-14 18.60% Flexural Strength(MPa) ASTM: D790-10 67.2 Flexural Modulus(MPa) ASTM: D790-10 2080 Notched IZOD(J/m) ASTM:D256-10 33.4 Water Absorption（24hr） ASTM:D570-22 1.02%

Net Weight

K Black Tough ABS Like 3D Printer Resin (1kg)

Click here to download the instruction manual Click here to download the settings M58 is a gray material known for its rigidity and toughness. The mechanical properties of the printed parts are comparable to tough thermoplastics, allowing holes to be drilled, screws to inserted, and other high stress modifications, making it ideal for producing functional parts that will experience long term static load, transient stress or strain, but it is not suitable for underwater applications. This 3D printer resin boasts high molding precision, wear resistance, and a smooth surface that preserves fine details from the original 3D file, so it’s also well-suited for producing miniatures and action figures. ▌ Descriptions Sturdy like ABS The mechanical properties of the M58 resin printed parts are similar to tough thermoplastic materials, with high tensile strength and excellent impact strength, can drill holes and nails in fragile locations. Wear-resistant and scratch-resistant The surface of M58 resin print is very hard, the assembly position will not drop powder after friction, suitable for printing movable joints, gears or bearing parts. Clear and sharp details M58 resin has high molding accuracy, is not easy to overexpose, and can accurately restore the fine details in 3d files. High-quality raw materials RESlONE prioritizes user care over cost considerations, selecting high-purity, low-irritation premium raw materials from around the world. Mixed with F69/F39/F39T Tough resin K/M58/M68/G217 can be mixed with F69/F39/F39T resin, which can make the printed parts tougher, more durable, and not brittle for a long time. ▌ Reviews Youtube: ガンプラ改造全塗装：HG ナイチンゲール vol.3[HG NIGHTINGALE custom build vol.3][３Dプリンター][光造形][魔改造]--七式ガンプラ部 Youtube: ガンプラ改造全塗装:HG ナイチンゲール vol.4[HG NIGHTINGALE custom build vol.4][３Dプリンター][光造形]--七式ガンプラ部 Youtube:FOB Scale Modellbau-Resione M58&M68 VS Anycubic ABS-LIKE resin Youtube: How I mix Resins for my Action Figure 3D Prints | Azrach Toys Youtube: べにやのVlog Youtube: M58 & Anti Impact--Nathan Kozuch ▌ Applications Action figures Miniatures GK Functional parts Assembly parts Jigs and fixtures Snap-fit designs ▌ Compatible 3D Printer All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 385-410nm LCD resin 3D printer All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer ▌ Material performance parameters METHOD DATA Viscosity(25℃)(mpa.s) ASTM:D4212-10 389 Liquid density(g/cm³) ASTM:D4052-22 1.12 Solid density(g/cm³) ASTM:D792-20 1.2 Shore Hardness(D) ASTM:D2240-05 88 Tensile Strength(MPa) ASTM: D638-14 52.3 Tensile Modulus(MPa) ASTM: D638-14 1820 Elongation at Break ASTM: D638-14 22.55% Flexural Strength(MPa) ASTM: D790-10 71.36 Flexural Modulus(MPa) ASTM: D790-10 2129 Notched IZOD(J/m) ASTM:D256-10 43.8 Water Absorption（24hr） ASTM:D570-22 1.25%

M58 Gray Tough ABS Like 3D Printer Resin (1kg)

Click here to download the instruction manual Click here to download the settings ▌ Attention! This resin is not recommended for novice users. Please download the manual before use. When failed printing with RESIONE setting probably needs to change the supports settings(See more details in RESIONE instruction) or increase the normal exposure time(Printers especially mono screen will have light decay). Flexible prints are easily deformed during printing, so they need thicker and denser supports. If the ambient temperature is lower than 25℃, please preheat the resin liquid before printing. For F69 prints with a thickness of more than 3mm, both the front and back sides need to be cured for more than 30 minutes when a post-curing box with 40W UV intensity is used. Fully post-cured prints are stronger, have a dry surface and are less likely to be scratched. If the resin is not used in the 3D printer for more than 1 day, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins. F39/F69/F39T flexible resin prints will increase in hardness as the temperature decreases.They become hard and tough prints in an environment of about 5°C, and they won’t be broken even with a hammer! If you want to keep the prints in a flexible state, it is recommended to use them in an environment above 20°C. If you need a softer and faster rebound resin, please choose F80 resin. ▌ Printing Settings Layer Height: 0.05mm Bottom exposure time: Default parameters for standard resins of machine brands*1.2 Normal exposure time: Default parameters for standard resins of machine brands*1.2 F69 resin is a black flexible resin with a high printing success rate, the details of the printed piece are clear and sharp. This resin is designed to provide prints with outstanding tear strength and flexibility. It finds wide application in figure toys such as dolls' vests, capes, weapons, and footwear, tires, shoe samples, seals, buffers, gaskets, transmission belts, and various flexible prototype production. Additionally, mixing F69 with other resins can enhance the non-brittleness of printed parts. ▌ Descriptions Like rubber: Flexible, tear resistance, folding resistance Shore hardness: 60-75A, the prints is very soft at a temperature above 20°C, but the lower the temperature, the harder it will become.It will become very hard and impact resistant at 5°C. It has better tear strength than other flexible resins, and the prints can be folded thousands of times. Fine details, easy-to-use soft resin The details of the F69 prints are very sharp and clear. The release agent is added to its formula, so after each exposure, the curing layer will have less adhesive force when it leaves the FEP film. In addition, the RESIONE team has specially designed the formula to ensure that the printed part exhibits a "soft with rigidity" performance during the printing process, ensuring that it does not deform. As toughening agent Mixing F69/F39/F39T resin with tough resin such as K/M58/M68/G217 can make the printed parts tougher, more durable, and not brittle for a long time. Wide applications Flexible resin is widely used in figure toys, footwear, design and industrial fields, such as tires, shoe samples, seals, gaskets, transmission belts, various flexible prototypes and dolls' vests, capes, weapons, etc. Detailed print settings and user's guide We provide settings for almost all mainstream 3D printers, and include importable settings files for different slicers, such as Chitubox/Lychee/Anycubic Workshop, etc. We also provide detailed instructions for the use of the resin and supports settings suitable for flexible resin. ▌ Reviews Youtube: Resione F69 гибкая фотополимерная смола--Федор Бихе Youtube: Воздействие агрессивной среды на Resione F69.--Федор Бихе Youtube:それつくちゃんねる / SoreTsuku Youtube:The Scalemodeling Channel Youtube: Hobbyist Life NOZZLER ▌ Certification RoHS ▌ Compatible 3D Printer All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 385-410nm LCD resin 3D printer All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer ▌ Material performance parameters METHOD DATA Viscosity(25℃)(mpa.s) ASTM:D4212-10 1145 Liquid density(g/cm³) ASTM:D4052-22 1.079 Solid density(g/cm³) ASTM:D792-20 1.15 Shore Hardness(A) ASTM:D2240-05 71 Tear strength(KN/m) ASMT:D624-98 17.59 Tensile Strength(MPa) ASTM: D412-06 6.59 Tensile Modulus(MPa) ASTM: D412-06 31.59 Elongation at Break ASTM: D412-06 222.21% Water Absorption（24hr） ASTM 570 1.74%

F69 Black Flexible Rubber-like 3D Printer Resin (1kg)

Click here to download the instruction manual Click here to download the settings ▌ Attention! This resin is not recommended for novice users. Please download the manual before use. When failed printing with RESIONE setting probably needs to change the supports settings(See more details in RESIONE instruction) or increase the normal exposure time(Printers especially mono screen will have light decay). Flexible prints are easily deformed during printing, so they need thicker and denser supports. If the ambient temperature is lower than 25℃, please preheat the resin liquid before printing. For F80 prints with a thickness of more than 3mm, both the front and back sides need to be cured for more than 10 minutes when a post-curing box with 40W UV intensity is used. Fully post-cured prints are stronger, have a dry surface and are less likely to be scratched. If the resin is not used in the 3D printer for more than 1 day, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins. F80 is a soft and elastic resin, you can choose between black and pink colors for your printing needs. The gingiva pink option is particularly well-suited for creating dental gingival models, while the black option is suitable for making toy tires, shoe samples, seals, buffers, and various elastic prototypes. F80 resin can retain its softness even in colder temperatures. It is not recommended for novice users due to its high viscosity, which can pose a printing challenge. ▌ Descriptions Soft touch F80 resin prints have a Shore hardness of 50-60A, soft to the touch, full of elasticity. Pink F80 resin is perfect for making dental gingival models Good resilience F80 resin prints have good resilience, and they can quickly recover their shape after deformation. Low temperature resistance Even in the cold winter below 10°C, F80 prints still remain soft, although their elasticity will decrease as the temperature decreases. Broad adaptability F80 resin is suitable for all mainstream LCD/MSLA/DLP 3d printers on the market, including RGB or Mono screen printers. ▌ User Reviews Youtube: Hobbyist Life YouTube:Счастливчик Youtube: それつくちゃんねる / SoreTsuku Youtube: F80 GINGIVAL--Nathan Kozuch ▌ Applications Dental flexible gingival masks Wearable object prototype Hobby ▌ Compatible 3D Printer All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 385-410nm LCD resin 3D printer All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer ▌ Material performance parameters METHOD DATA Viscosity(25℃)(mpa.s) ASTM:D4212-10 2180 Liquid density(g/cm³) ASTM:D4052-22 1.064 Solid density(g/cm³) ASTM:D792-20 1.119 Shore Hardness(A) ASTM:D2240-05 64 Tear strength(KN/m) ASMT:D624-98 11.56 Tensile Strength(MPa) ASTM: D412-06 2.66 Tensile Modulus(MPa) ASTM: D412-06 6.19 Elongation at Break ASTM: D412-06 155% Water Absorption（24hr） ASTM 570 2.07%

Color

F80 Elastic 3D Printer Resin Black / Gingiva pink

Black(1000g)

Gingiva pink(500g)

HOT SALE

RESIONE.COM

Amazon US

AliExpress

Amazon DE

Amazon ES

Amazon UK

Amazon FR

Amazon JP

Amazon IT

Facebook

Facebook Group

Resin Test Piece

Youtube

@resione

Enjoy 30 days of Hulu for FREE

Claim 10 free meals* from HelloFresh

Get 60% off Sitewide

Sip your way to stronger health with 30% off at ARMRA

Save 10% at Omnilux LED

Save 10% on Ritual Multivitamins Subscriptions

You've scored 50% OFF Factor 🤤

Join now and get 50% off a Club membership

Get your first box FREE with Curology!

Claim your $20 bonus with Acorns

Sign up for Headspace Today and get a 14 day free trial!

Get AAA membership for half the price!

Get 30¢/gal cash back on gas at major stations

Get 15% off at Equip Foods

20% Off the at FabFitFun with code INSIDER20

Get 80% off your first order when signing up to be a VIP!

Get 15% off for cleaner skin at CLEARSTEM

Get your first box FREE with Agency!

50% off + Free Shipping at Purple Carrot!

Power Up with Daily Harvest's High-Protein Smoothies

Save $100 with Gobble

Save 10% on your First Maev Order!

15% off your favorite non-alcoholic spirits at The Zero Proof

10% off JLab’s award‑winning audio gear

Get help with or without insurance. Use code SPACE80 for $80 off.

Start speaking a new language in just 3 weeks

@resione

RESIONE makes 3D printing more practical

About this account

More from Linktree