North American manufacturer of modded handheld video game consoles and gear.

Retro Modding® Official: TikTok, Instagram, X, Facebook, Twitch, Twitter | Linktree

Retro Modding® website

This product is made in collaboration with Nathalie the Nerd. Retro Modding is proud to have her trust to take care of the production and distribution of her GBA LED boards! While there are a variety of button colors for you to choose from, you might find yourself wanting a little bit more for your upcoming mod. With this LED board from Natalie the Nerd, you're a quick installation away from fully illuminated buttons, in a color of your choice!The left and right parts are independent which gives you the opportunity to mix the colors with different led kits, which allows you to have a total of 36 color combinations! White silicone pads and clear buttons are recommended for the best effect. Features LED-illuminated buttons, in your choice of six different colors Straightforward installation with minimal soldering Documentation Natalie the Nerd's GBA LED Board installation guide Do not forget the “BRIDGE OR CONTROL” pads, They must be bridged or have a LED Control Board installed. Included 1 x Game Boy Advance LED board (left + Right part), in a color of your choice Notes You will need a wire (not included) to connect the 2 PCBs together Colors may vary from what you see on your display With the exception of the power LED, the console would need clear (or at least transparent) buttons for the effect to be noticeable; clear buttons are available here If you are looking to have a better control over your LED board, you can add these LED Control Board to your build. Change Log 2022-10-07: Description updated to include RM's participation in production and distribution. Price changed from 45.99$ to 9.99$.

Color

LED Board for Game Boy Advance

Blue

Green

Pink

White

Yellow

This custom, high-quality, long-lasting rechargeable battery pack is designed especially for the Game Boy Advance. The product consists of a board and an attached, rechargeable LiPo battery. The unit fits comfortably in the console's battery compartment with minimal trimming. It charges via USB-C without you having to turn off your console. Please read the entire product description carefully before purchasing this product. Remember to turn the battery pack on before powering on your console. Also available in Micro-USB here. Features Designed and assembled in the USA 🇺🇸 v1.3 and above offers a 20% capacity increase, now 1700mAh! Provides over 22 hours of battery life on an unmodded console and up to 11 hours on an IPS modded console ±5 hour charging time Rechargeable via USB-C and works with most external phone chargers or battery pack chargers (1 Amp / 2.1 Amp / 3 Amp). See notes for more informations. Allows you to play while charging through USB-C (trimmed battery door recommended) Includes built-in battery pack status LED indicator for low battery, charging, charged Includes innovative power regulator that activates the GBA's built-in low battery LED when the rechargeable battery pack is low Red light on battery pack lights up when voltage drops to low-power mode (5 minutes of play remaining) as a final warning to save your game or recharge the battery pack Storage mode feature puts the battery in ultra low power mode when not in use for an extended period of time Simple install⁠ with minimal trimming required—no need to open the GBA shell Easily removable from your GBA Includes built in protection against reverse polarity, low-voltage, over-voltage, and short-circuits Specs Dimensions: 52.6 mm x 31.25 mm x 14.4 mm Weight: 36 grams (6-gram PCB + 30-gram LiPo) Typical Operating Output voltage: 3.0 V Low-Battery Operating Output Voltage: 2.4 V Battery Voltage when Fully Charged: 4.2 V Battery Chemistry: LiPo 3.7 V single cell Battery Cell Size: 1700 mAh Power Converter Technology: High Efficiency Step-Down Converter Switching Frequency: 4 MHz Max Operating Temperature: 45°C for charging Power Save Mode: Yes Short Circuit Protection: Yes 1amp Charger Input: USB-C Plug USB-C Voltage Input Range: 4.5 to 14.1 V Recommended Charger USB-C Voltage: 5.1 V Recommended Charger USB-C Wattage: >1 W (1 A at 5 V) Termination Style: Spring Tabs and USB-C Standard Charge Current: 500mA standard charge rate, up to ~750mA if compatible charge port detected Standard Charge Time: ~5 hours Standard Runtime: ~22 hours LED Indicators: Green (charged), blue (charging), red (low) Options USB-C Power Adapter Documentation An installation guide is available to walk you through how to trim your shell for the rechargeable battery pack. Most of the shells nowadays don't need trimming for the battery pack, such as the Funnyplaying shells. Included 1 x 1700 mAh Game Boy Advance Rechargeable Battery Pack Any accessories selected above Notes This product page is filled-in with the best of our knowledge, feel free to raise any concerns you may have. Battery packs ship with the switch set to OFF. Please remember to turn the battery pack ON before powering on your console. Our battery packs are produced in-house, meaning some production time is always involved. Each battery goes through a rigorous quality assurance process before shipping. Parts of the console's battery compartment need to be trimmed in order for the battery pack to fit into the shell. We strongly recommend purchasing an aftermarket Game Boy Advance shell to avoid damaging your genuine shell. These battery packs have been made with aftermarket shells in mind. Battery cover does not need to be trimmed if you prefer to keep the console's original aesthetic, but this option requires removing the battery cover whenever you want to charge the battery pack. If, at any point, you want to return to using AA batteries, all you need to do is put the metal contact back in the housing and insert your AA batteries. Even though the shell was trimmed for the battery pack, the AA batteries will fit safely and will power on your console. Due to restrictions imposed by USPS, batteries going to the United States can only be shipped via ground transportation, which may extend the time it takes for you to receive your order. Please note that batteries are prohibited from being shipped into Germany. Orders for individual batteries and for custom consoles with this battery packs will be cancelled and refunded. Unfortunately, this situation is out of our control. We're sorry for any inconvenience this may cause. Warning This product is fragile and should be handled with care. It uses a rechargeable Lithium ion polymer (LiPo) battery and, as with all LiPo batteries, it can leak or explode if not handled properly. By purchasing this battery pack, you acknowledge that you take responsibility for how you treat this product. Do not force the battery to fit in the Game Boy Advance battery compartment. Trim more plastic away from your shell until you guarantee a good fit. Do not leave your battery pack unattended if it's close to a heat source We recommend not removing and reinserting the battery pack more than you have to. Once you have installed it in your system, leave it there and charge it either by removing the battery door or by trimming the battery door to fit the charger. Repeated removal of the battery pack can cause premature wear on the outer foil, leading to potential hazards. Change Log 2021-11-24: Updated product description for revised v2.1 model. 2020-09-04: Updated product description for revised v1.3 model, 1700mAh. 2020-08-24: Updated charge time of 2.5 hours that referred to previous 1000mAh model to 4.0 hours for the 1400mAh.

Title

USB-C Rechargeable Battery Pack for Game Boy Advance

Default Title

Introducing the sharpest Game Boy Advance display yet. Gone is the blur of early 2000s hardware. Enjoy your favorite GBA titles with this startlingly crisp and impressively vibrant backlit IPS LCD display by Funny Playing. V2 includes an upgraded ribbon cable that eliminates the screen tearing for a seamless display. Please read the product description carefully and in its entirety before purchasing. NOTE: Due to some shells, such as the Funny Playing GBA shells, being moulded for the IPS, the 3D-printed bracket is no longer included in this kit, as it cannot be used with these shells. If you are still in need of a centring bracket, they are available for purchase separately. Features V2 includes a newly synchronized clock to fix the diagonal screen tearing present in the first iteration of the ribbon cable Streamlined V2 ribbon design for easy installation Initial brightness to 30% and optimized night brightness settings on V2 Backlit IPS LCD brighter than AGS-101 or NDSL displays Crisper image than the AGS-101 Proportional image Fast refresh rate with no blur Wide viewing angle Easy, solder-free installation with little trimming involved 10 brightness levels (requires soldering three wires) Supports the software-based sleep mode built into select games Included 1 x IPS LCD 1 x Ribbon cable adapter (compatible with 32 and 40-pin boards) 1 x Foam tape Documentation Please check out our tutorial for instructions on how to install the IPS LCD (centered and offset methods) and the built-in brightness controller. Updated pictures with the V2 ribbon are forthcoming. Notes V2 eliminates the screen tearing from the first iteration of the ribbon cable and streamlines the ribbon design Unlike the AGS-101 display, the IPS LCD is much thinner and has a larger bezel on the left side. Since most of the display is not supported by the shell, we have designed a 3D-printed centering bracket. It's also available separately. The IPS panel's viewing area is slight larger than that of the AGS-101. In order to make the entire display visible, the LCD requires a lens with a slightly larger viewing area (~1 mm on each side). We sell silk screen centered lenses with this larger viewing opening. The interior left wall (D-pad side) must be removed to center the viewing area on the display. Since the viewing area is approximately the same dimensions as the shell's display cut-out (~77 mm) the the edge of the shell will be visible unless trimmed. Wires to connect the brightness controller are not included with the LCD. We recommend using 30 AWG silicone stranded-core wire. 11-hours of battery life on brightness level 6 with volume, tested using our 1700mAh rechargeable battery pack. Backlight bleeding protectors are neither necessary or usable with the IPS LCD V1 of the ribbon cable presents a visible diagonal frame refresh that occurs in moments of transition, which is noticeable in some games. This is due to the frame buffer. It's subtle and we consider the benefits of the display to outweigh this minimal tearing, but please keep this in mind before you purchase V1 of this product. Warning We strongly recommend testing the display before installing it in your Game Boy Advance. Please follow our Display Testing Guide to confirm the kit is working before the adhesive is secured, the display protection sheet removed, or any non-critical soldering to the ribbon or driver PCB. We are unable to accept returns or replacements on kits that have been installed in a console. Individual replacement parts may be available in the "Included" section above. The ribbon is very fragile, be sure to handle it carefully to avoid damage. Too much pressure can permanently damage the display, do not force the shell closed around the LCD. Ensure the shell is properly trimmed for the display before attempting to install it. Change Log 2020-02-13: Changed kit content 2019-09-05: Removed v1 upgrade promotion. 2019-08-11: Introduced V2 of the ribbon cable. Updated product description accordingly. Discounted remaining stock of V1. 2019-07-11: Added note about backlight bleeding protector. Added note about compatibility with software-based sleep mode. 2019-07-09: Added note about testing display before applying foam tape. 2019-06-27: Added note about battery life. 2019-06-21: Clarified product notes, specified that offset lens includes metallic Game Boy Advance logo, updated tutorial, added wire gauge recommendation, removed pre-order. 2019-06-12: 3D-printed centering bracket added to what's included in the LCD kit. 2019-06-10: Description updated to include notes about viewing area and diagonal screen tearing. 2018-06-08: Product added with a note that description was in progress.

Funny Playing IPS LCD for Game Boy Advance

This custom, plug-and-play, Game Boy Advance SP Battery stands out from other alternatives by providing a true 900 mAh capacity to your GBA SP, enough to fuel newer IPS LCDs for hours on end. This item consists of our custom iteration of Makho's GBASP Battery Board. It's assembled in a custom-made 3D printed housing (available for free on our Thingiverse) and uses replaceable high quality 900 mAh LiPo batteries, like our other battery pack products. Features Designed and assembled in the USA 🇺🇸 Replaceable ~900 mAh Lithium Polymer (LiPo) battery Plug-and-Play 3D Printed Housing Matte Black with Gold plating PCB Included 1 x Game Boy Advance SP Battery Notes A Phillips Screwdriver is required to remove the battery door separately Although the LiPo manufacturer claims a capacity of 900 mAh battery life, exact capacity may vary (usually higher). Please note that batteries are prohibited from being shipped into Germany. Orders to Germany will be canceled and refunded. Unfortunately, this situation is out of our control. We're sorry for any inconvenience this may cause. Our battery packs are produced in-house, meaning some production time is always involved. Each battery goes through a rigorous quality assurance process before shipping. With a minor modification, you are able to use this battery with the original Nintendo DS.

900 mAh Battery for Game Boy Advance SP

Looking to treat your Game Boy to a sweet new shell? We've teamed up with Kikistardust (@8bitpixeldust) to produce this pastry themed shell, complete with a UV-printed design on the front, as well as the battery door. Features Machine cast DMG shell with a lightly textured finish to reproduce the feel of the original housing High-quality print on both front and back of the DMG shell Included 1 x Custom UV printed front and back DMG shell with matching battery door 1 x Extension (link) port cover 1 x Set of brand new screws Notes Battery contacts and metal shield not included Colors may vary from what you see on your display This shell is an aftermarket part that may not look or feel identical to the original Hydro-alcoholic gels (such as hand sanitizer) and their residue can damage the print if they come in contact. Please pay particular attention to this when using UV-printed shells.

Pastry Boy Shell for Game Boy

Chocolate

Latte

While the look of the original NES controller is a now iconic symbol of retro gaming, it might be time to refresh your well-used controller with a modern, and colourful, new shell. If so, this is the product for you! Our NES controller shells are manufactured in a variety colours, using our in-house mould that was meticulously refined to create a final product that's as close to the OEM shell as we could make it. Add a splash of colour to your NES controller, and pick one up today! Even better, if you're looking to pair this with some equally colourful buttons, our NES style Game Boy buttons work perfectly. Features Replacement plastic shell for NES controller Durable ABS (acrylonitrile butadiene styrene) material Manufactured to high quality using our in-house mould Available in a variety of colours Included 1 x NES Controller Shell 1 x Set of screws Notes Colors may vary from what you see on your display This is an aftermarket product and may not feel identical to its genuine counterpart Please note that this is just the plastic housing used for the controller; controller PCB and buttons are not included

Shell for NES Controller

Black

Clear

Clear Purple

Pastel Pink

Pastel Mint

Pastel Blue

Super Nintendo Lavender

Neon Green

SFC Blue

SFC Red

Clear Black

Clear Green

Have a look to our top sellers!

(👍≖‿‿≖)👍  👍(≖‿‿≖👍)

Need help? Contact us by mail at: support@retromodding.com or click here for Facebook chat

Check our free 3D files on Thingiverse

Our retro game publishing company

➡️ Incube8 Games ⬅️

Want a dystopian RPG? Check THE MACHINE's website!

Wing Warriors (GBC) - LITE Edition

Gunship (GB) - LITE Edition

IndestructoTank! (GB)

Magipanels (GB)

Dragonborne DX (GBC)

Deadeus (GBC)

The Year After (GBC)

GENESIS (GB)

INFINITY's website

Our Social links

Our  New Secondary Instagram Account

Facebook

Youtube

Twitch

Twitter

Official resellers

AU - Yesterday's Tech

UK - Deadpan Robot

Our Ambassadors

PegCity8Bit

Mizucat

Need something else?

Looking for the Modded Gameboy Gameboy Club?

Looking for the Game Boy Discord server?

Looking for the Micro music Italy Twitch Channel?

Retro Modding®

Enjoy 30 days of Hulu for FREE

Claim 10 free meals* from HelloFresh

Get 60% off Sitewide

Sip your way to stronger health with 30% off at ARMRA

Save 10% at Omnilux LED

Save 10% on Ritual Multivitamins Subscriptions

You've scored 50% OFF Factor 🤤

Join now and get 50% off a Club membership

Get your first box FREE with Curology!

Claim your $20 bonus with Acorns

Sign up for Headspace Today and get a 14 day free trial!

Get AAA membership for half the price!

Get 30¢/gal cash back on gas at major stations

Get 15% off at Equip Foods

20% Off the at FabFitFun with code INSIDER20

Get 80% off your first order when signing up to be a VIP!

Get 15% off for cleaner skin at CLEARSTEM

Get your first box FREE with Agency!

50% off + Free Shipping at Purple Carrot!

Power Up with Daily Harvest's High-Protein Smoothies

Save $100 with Gobble

Save 10% on your First Maev Order!

15% off your favorite non-alcoholic spirits at The Zero Proof

10% off JLab’s award‑winning audio gear

Get help with or without insurance. Use code SPACE80 for $80 off.

Start speaking a new language in just 3 weeks