HotPoly3D: A 3D printing supplies company dedicated to providing new products!

HotPoly3D Official: TikTok, Instagram, Facebook | Linktree

HotPoly3D Products:

What is FusionLock Metallic Transfer Adhesive? Our FusionLock Transfer Adhesives are the first of it's kind and one the newest additions to 3D printing technology. Metallic Transfer Adhesives are pigmented adhesives that have been engineered to transfer onto the bottom of 3D printed parts after printing & cooling. Done correctly, this process will gives a "plating" effect to bottom side of 3D prints. Leaving a sparkling brushed metallic appearance on the bottom surface. The process involves two main parts: FusionLock Release Agent (Part A) & FusionLock Metallic Transfer Adhesive (Part B). Part A is applied and heated to create a film that is designed to release from the bed plate after printing. Part B is applied on top of the Part A layer after drying and is the pigmented layer that ultimately gives the beautiful plating effect. Colors: - Metallics: Gold, Silver, Bronze - Neon (Coming Soon) - Chameleon/Color shift (Coming Soon) - Duochrome (Coming Soon) Compatible bed surfaces: - PEI on spring steel plate (smooth) * recommended* - PEI on spring steel plate (textured) - PEI sheet on glass - plain glass/borosilicate glass plates Compatible filament materials: Standard - PLA/PLA+, ABS, TPU, PETG (recommend starting with a high quality PLA or PETG to get the process down) High-temp - Nylons, ASA, Polycarbonate (PC), PEI, PEEK, PEKK *more in testing *Filament materials with recommended bed temperatures below 80°C needs to be increased to at least 80-85°C* Instructions: Step 1: Clean build surface with FusionLock Build Surface Cleaner or degreaser. Step 2: Heat bed heater to 50-60°C. Step 3: Apply Part A FusionLock Release Agent, brush evenly. Step 4: Place bed plate with Part A Release Agent Layer in Step 3 on bed heater until fully dry, repeat for 2-3 layers. Step 5: Remove bed plate with Part A Release Agent, cool bed heater to 40-50°C. Step 6: Apply Part B FusionLock Metallic Transfer Adhesive, brush evenly. Step 7: Place bed plate with Part B FusionLock Metallic Transfer Layer in Step 6 on bed heater until fully dry, repeat for 2-3 layers. Step 8: Print! Step 9: Allow to cool below 35°C and remove from bed plate, then clean residual film in gaps and on edges with provided scalpel at 45° angle. Step 10: Permanently fix FusionLock Metallic Transfer Adhesive onto the printed part, apply 2-3 even coats of acrylic clear coat spray. *A heat gun (recommended) or blow dryer can be used instead of using the 3D printer bed heater to significantly speed up the process* Helpful Tips Before Printing: Confirm that your heated bed is level before printing. It's recommend to create a new printer profile in your slicer dedicated to FusionLock Transfer Adhesives. Please make sure that the initial print layer is below 45mm/s, 10,000 mm/s2 acceleration, and 15mm/s Jerk or 5mm/s Square Corner Velocity. After the first 2-4 layers you can return to normal speeds. It's also recommend to increase initial layer flow to 15-35% to fill in any gaps. Make sure that the first layer is is low enough to slightly overlap layers for an even and complete film transfer. If the nozzle is too low, the nozzle will dig into the adhesive film you just applied and destroy it, too high and the adhesive film won't transfer evenly. More Detailed Instructions: Step 1: Thoroughly clean 3D printer bed surface with FusionLock Build Surface Cleaner or a degreaser to remove any grease, dirt, adhesives, etc. Any containments left on the bed surface such as deep scratches, left over filament, etc. will be visible in the transferred adhesive film. In your slicer, make sure to put your prints on a clean portion of your bed surface if you have damaged to your bed plate surface. (if you have light scratches/blemishes, use a steel wool 0000 fine finish pad and rub out the scratches/blemishes to restore your bed plate). *Following the next steps for Part A & B correctly is very important to guaranteeing you the best possible finish* Step 2: Remove the bed plate from 3D printer, then heat the bed heater to 50-60°C to prepare for Part A Release Agent (*don't heat above 60°C*). Step 3: While waiting for the bed to reach 50-60°C, open and drip enough Part A Release Agent to evenly cover the bed surface/print area, then use a provided application brush to evenly coat your bed surface/print area. Step 4: Place the bed plate on the previously heated (50-60°C) heated bed in Step 2 and allow the Part A layer just applied in Step 3 to fully dry. Wait until the film visibly goes from wet to fully dry before applying another layer (30-120 seconds). Step 5: Repeat Step 3 & 4 to create 2-3 layers of Part A Release Agent; make sure not to brush too hard when applying addition layers, excessive brushing can disrupt the previous layer *at least two Part A layers highly recommended*. Step 6: Change/cool the bed plate temperature to 40-50°C to prepare for Part B Metallic Transfer Adhesive (*don't heat above 50°C or you will make wet adhesive layer begin to bubble from the heat). Step 7: With the bed plate removed from the bed, apply Part B Metallic Transfer Adhesive in a zig-zag pattern. Evenly cover the bed surface/print area, then use a provided application brush to evenly coat your bed surface/print area. Step 8: Place bed plate back on previously heated 40-50°C heated bed in Step 7 and allow the Part B Metallic Transfer Adhesive layer just applied to fully dry. Wait until the film visibly goes from wet to fully dry before applying another layer (60-180 seconds). Step 9: Repeat Steps 7 & 8 to create 2-3 layers of Part B Metallic Transfer Adhesive; make sure not to brush too hard when apply addition layers, excessive brushing can disrupt the previous layer *at least two Part B Metallic Transfer Adhesive layers highly recommended for best results* *If you notice bubbles forming in the first layer, drip and lightly brush Part B Metallic Transfer Adhesive while the bed plate is warm (40-50°C) to force pigment into the bubbles formed, it's recommended to only do this in the first layer. If done correctly, the second layer should completely cover the bubbles. Step 10: After the second or additional layers of Part B Metallic Transfer Adhesive have dried, you are now ready to print! Step 11: Allow print to fully cooldown at temperatures 35°C or below. This step is VERY IMPORTANT for proper film transfer. When cooled, carefully and lightly score around the 3d printed printed part before bending the flexible steel plate to release the printed part. Same instructions goes for glass, score around the printed part then press on the part For hard surfaces like glass, carefully pull on all of the edges of the printed part to release the print from the bed plate. Step 12: Clean residual film in gaps and on edges with provided scalpel. Make sure to hold scalpel at a 45° angle to the printed part edges. You can also use the back of the scalpel to scrap away at the edges but be advised: if done too roughly it will cause the film pull away from printed part surface. Step 13: To permanently fix and protect FusionLock Metallic Transfer Adhesive film onto the printed part, apply 2-3 light even coats of acrylic clear coat spray, wait roughly 30 minutes to an hour between coats. *If the transferred film didn't come out how you wanted, you can completely rinse off the pigmented film with running water.

Size

FusionLock Metallic Transfer Adhesive 60 & 120mL Complete Kits  - Pigmented Transfer Adhesive Film for 3D Printers

60mL (Gold) FusionLock Metallic Transfer Adhesive + 60mL Release Agent + 80mL Build Surface Cleaner

60mL (Silver) FusionLock Metallic Transfer Adhesive + 60mL Release Agent + 80mL Build Surface Cleaner

60mL (Bronze) FusionLock Metallic Transfer Adhesive + 60mL Release Agent + 80mL Build Surface Cleaner

120mL (Gold) FusionLock Metallic Transfer Adhesive + 120mL Release Agent + 250mL Build Surface Cleaner

120mL (Silver) FusionLock Metallic Transfer Adhesive + 120mL Release Agent + 250mL Build Surface Cleaner

120mL (Bronze) FusionLock Metallic Transfer Adhesive + 120mL Release Agent + 250mL Build Surface Cleaner

Olympic Pack: 60mL x3 (Gold+Silver+Bronze) FusionLock Metallic Transfer Adhesive + 8oz (250mL) Release Agent +  8oz (250mL) Build Surface Cleaner

Jumbo Olympic Pack: 120mL x3 (Gold+SIlver+Bronze) FusionLock Metallic Transfer Adhesive + 16oz Release Agent +  250mL Build Surface Cleaner x2

Introducing the FusionLock Nano Adhesive! This product is the ultimate 3D printing adhesive for high-performance filaments. Say goodbye to failed prints and hello to hassle-free printing. With one layer of FusionLock Nano Adhesive, you can print 50-100+ times without losing adhesion. Our adhesive works on various build surfaces, including glass and PEI, preventing warping and layer shifting. Our adhesive is the perfect solution for rejuvenating old PEI plates, giving your build surface a new life. Unlike other adhesives, FusionLock Nano Adhesive doesn't leave any residue, flakes, or mess. It's engineered to force adhesion while pulling on the printed part surface, making it warp-proof. With our adhesive, you can print high-performance materials such as PC, Nylons, ASA, PEI, PEKK/PEEK, carbon, and glass fiber without an enclosure. *It's always recommended to have a Fume Extractor/ventilation system when printing with filaments with high levels of VOCs. FusionLock Nano Adhesive is the first high-speed 3D printing adhesive, allowing you to print tall objects at high speeds without worrying about your prints coming off the build surface. Don't let 3D printing failures cost you money! Use FusionLock Nano Adhesive and count on it to stick every time. Our adhesive is engineered to bring all of the chemical performance gains from glue sticks, blue painters tape, AquaNet, Vision Miner, and Magigoo all into one bottle. Compatible with the following: Standard Filaments: PLA/PLA+, ABS, PETG, TPU High-Performance Filaments: Nylons, Carbon/Glass Fiber, ASA, PVA, HIPS, Polycarbonate (PC), PEI, PEEK/PEKK, Glow-in-the-Dark, & More* *FusionLock Nano Adhesive doesn't work with PP (Polypropylene) filaments. To get these filaments to stick to a build surface, cover the surface with packaging tape as it is made of PP and will stick very well. At HotPoly3D, we are passionate about pushing the boundaries of 3D printing technology. Our goal is to make 3D printing accessible to everyone, from hobbyists to professionals. We believe that 3D printing has the power to revolutionize the way we approach manufacturing and design, and we want to be at the forefront of that change. Please note that the SDS for FusionLock Nano Adhesive is currently pending. Features: - High-temperature adhesive for all compatible filaments | PLA - CF PEEK/PEKK - Consistent and strong adhesion performance - Extremely durable - Porous texture increases filament grip - Adhesive film stays on build surface longer, saving time and money - Easy to apply - Won't leave flaking adhesive film on printed parts - Effortless part removal Works on great on: - PEI textured/smooth - Stock Creality bed plates - Glass/borosilicate glass - Garolite (G-10) - Spring steel - FR4 Contains: (1) 120mL FusionLock Nano Adhesive Bottle (1) Wide Application Brush

Title

FusionLock Nano Adhesive 120mL (Drip & Brush)  - High Temperature 3D Printing Glue for Hot Beds | Fast Application

Default Title

Introducing the FusionLock Nano Adhesive! This product is the ultimate 3D printing adhesive for high-performance filaments. Say goodbye to failed prints and hello to hassle-free printing. With one layer of FusionLock Nano Adhesive, you can print 50-100+ times without losing adhesion. Our adhesive works on various build surfaces, including glass and PEI, preventing warping and layer shifting. Our adhesive is the perfect solution for rejuvenating old PEI plates, giving your build surface a new life. Unlike other adhesives, FusionLock Nano Adhesive doesn't leave any residue, flakes, or mess. It's engineered to force adhesion while pulling on the printed part surface, making it warp-proof. With our adhesive, you can print high-performance materials such as PC, Nylons, ASA, PEI, PEKK/PEEK, carbon, and glass fiber without an enclosure. *It's always recommended to have a Fume Extractor/ventilation system when printing with filaments with high levels of VOCs. FusionLock Nano Adhesive is the first high-speed 3D printing adhesive, allowing you to print tall objects at high speeds without worrying about your prints coming off the build surface. Don't let 3D printing failures cost you money! Use FusionLock Nano Adhesive and count on it to stick every time. Our adhesive is engineered to bring all of the chemical performance gains from glue sticks, blue painters tape, AquaNet, Vision Miner, and Magigoo all into one bottle. Compatible with the following: Standard Filaments: PLA/PLA+, ABS, PETG, TPU High-Performance Filaments: Nylons, Carbon/Glass Fiber, ASA, PVA, HIPS, Polycarbonate (PC), PEI, PEEK/PEKK, Glow-in-the-Dark, & More* *FusionLock Nano Adhesive doesn't work with PP (Polypropylene) filaments. To get these filaments to stick to a build surface, cover the surface with packaging tape as it is made of PP and will stick very well. At HotPoly3D, we are passionate about pushing the boundaries of 3D printing technology. Our goal is to make 3D printing accessible to everyone, from hobbyists to professionals. We believe that 3D printing has the power to revolutionize the way we approach manufacturing and design, and we want to be at the forefront of that change. Please note that the SDS for FusionLock Nano Adhesive is currently pending. Features: - High-temperature adhesive for all compatible filaments | PLA - CF PEEK/PEKK - Consistent and strong adhesion performance - Extremely durable - Porous texture increases filament grip - Adhesive film stays on build surface longer, saving time and money - Easy to apply - Won't leave flaking adhesive film on printed parts - Effortless part removal Works on great on: - PEI textured/smooth - Stock Creality bed plates - Glass/borosilicate glass - Garolite (G-10) - Spring steel - FR4 Contains: (1) 60mL Dauber Tip FusionLock Nano Adhesive Bottle

FusionLock Nano Adhesive 60mL Dauber Tip (Easy Apply) - High Temperature 3D Printing Glue for Hot Beds | Fast Application

At HotPoly3D, we know that regular maintenance is key to ensuring the longevity and optimal performance of your 3D printer. That's why we're excited to offer our Mobilux EP2 3D Printing Grease, designed specifically for maintaining linear rails, smooth metal rods, and lead screws.From the tried and tested Mobil Grease Mobilux EP2, and we've put it into a convenient 10mL syringe with an easy-to-use 1.5 inch (38mm) needle. This allows for precise application of the grease directly into the linear rail oil port, ensuring that your bearings stay well-lubricated for smooth and efficient printing.But what makes our Mobilux EP2 grease stand out from the rest? It's a high-performance lubricant that provides excellent protection against wear, rust, and corrosion. It's also highly resistant to water washout and has a wide temperature range, making it ideal for use in a variety of environments.When you purchase our Mobilux EP2 3D Printing Grease, you'll also receive a microfiber cloth and a depressor assist tool to help you get the perfect grip and apply the grease with ease.Trust in HotPoly3D for all your 3D printing maintenance needs, and keep your printer running like new with our high-quality Mobilux EP2 3D Printing Grease. Contains: (1) 10mL Syringe of Mobilux EP2 Grease (1) 1.5in (38mm) needle (1) Syringe Cap (1) Microfiber Cloth (1) Depressor Assist Tool

Mobilux EP2 3D Printing Grease for Maintenance on Linear Rails, Smooth Metal Rods, Lead Screws | Includes Microfiber Cloth and Depressor Assist Tool

Introducing the revolutionary FusionLock Build Surface Cleaner by HotPoly3D! Say goodbye to struggling with stubborn adhesives and hard-to-remove grease and dirt from your 3D printer build surface! Our Build Surface Cleaner is a powerful degreaser and emulsifier that works on various build surfaces such as glass, PEI, Kapton tape, and masking tape. Unlike other solutions that can damage your build surface and strip it of its adhesion properties, FusionLock Build Surface Cleaner has been engineered to give your build surface a refresh without degrading its performance. It even works wonders for those who prefer not to use adhesives, keeping the build surface clean and free of contaminants before prints. Using the Build Surface Cleaner is easy. Simply shake the bottle well before use and spray it on the entire surface of your build surface. Then, wait 1-3 minutes for the product to soak and begin wiping with a microfiber cloth under warm running water. Wipe the surface until visibly clean for optimal results. FusionLock Build Surface Cleaner was specifically created to remove our FusionLock Nano Adhesive, one of the strongest adhesives on the market. This custom adhesive remover/cleaner makes it effortless to remove any adhesives properly, saving you time and effort. We take pride in the fact that our Build Surface Cleaner is a safe and effective solution for all your 3D printing needs. Made with quality ingredients, it is sure to give you a hassle-free printing experience. At HotPoly3D, we are passionate about pushing the boundaries of 3D printing technology. Our goal is to make 3D printing accessible to everyone, from hobbyists to professionals. We believe that 3D printing has the power to revolutionize the way we approach manufacturing and design, and we want to be at the forefront of that change. Works on great on: - PEI textured/smooth - Stock Creality bed plates - Glass/borosilicate glass - Garolite (G-10) - Spring steel - FR4 Contains: (1) 250ml FusionLock Bed Surface Cleaner Bottle (1) Microfiber Cloth

FusionLock Build Surface Cleaner 250ml Spray Bottle - Powerful Solvent Degreaser for 3D Printer Build Surfaces | Give Your Build Surface a Proper Refresh | Promotes Adhesion

Introducing the FusionLock Nano Adhesive Spray! Same great adhesion from our FusionLock Nano Adhesive, now in a Spray bottle for easier and faster application! This product is the ultimate 3D printing adhesive for high-performance filaments. Say goodbye to failed prints and hello to hassle-free printing. With one layer of FusionLock Nano Adhesive, you can print 50-100+ times without losing adhesion. Our adhesive works on various build surfaces, including glass and PEI, preventing warping and layer shifting. Our adhesive is the perfect solution for rejuvenating old PEI plates, giving your build surface a new life. Unlike other adhesives, FusionLock Nano Adhesive doesn't leave any residue, flakes, or mess. It's engineered to force adhesion while pulling on the printed part surface, making it warp-proof. With our adhesive, you can print high-performance materials such as PC, Nylons, ASA, PEI, PEKK/PEEK, carbon, and glass fiber without an enclosure. *It's always recommended to have a Fume Extractor/ventilation system when printing with filaments with high levels of VOCs. FusionLock Nano Adhesive is the first high-speed 3D printing adhesive, allowing you to print tall objects at high speeds without worrying about your prints coming off the build surface. Don't let 3D printing failures cost you money! Use FusionLock Nano Adhesive and count on it to stick every time. Our adhesive is engineered to bring all of the chemical performance gains from glue sticks, blue painters tape, AquaNet, Vision Miner, and Magigoo all into one bottle. Compatible with the following: Standard Filaments: PLA/PLA+, ABS, PETG, TPU High-Performance Filaments: Nylons, Carbon/Glass Fiber, ASA, PVA, HIPS, Polycarbonate (PC), PEI, PEEK/PEKK, Glow-in-the-Dark, & More* *FusionLock Nano Adhesive doesn't work with PP (Polypropylene) filaments. To get these filaments to stick to a build surface, cover the surface with packaging tape as it is made of PP and will stick very well. At HotPoly3D, we are passionate about pushing the boundaries of 3D printing technology. Our goal is to make 3D printing accessible to everyone, from hobbyists to professionals. We believe that 3D printing has the power to revolutionize the way we approach manufacturing and design, and we want to be at the forefront of that change. Please note that the SDS for FusionLock Nano Adhesive is currently pending. Features: - High-temperature adhesive for all compatible filaments | PLA - CF PEEK/PEKK - Consistent and strong adhesion performance - Extremely durable - Porous texture increases filament grip - Adhesive film stays on build surface longer, saving time and money - Easy to apply - Won't leave flaking adhesive film on printed parts - Effortless part removal Works on great on: - PEI textured/smooth - Stock Creality bed plates - Glass/borosilicate glass - Garolite (G-10) - Spring steel - FR4 Contains: (1) FusionLock Nano Adhesive 250mL Spray Bottle (1) Wide Application Brush

FusionLock Nano Adhesive 250mL Spray Bottle (Adjustable Nozzle) - High Temperature 3D Printing Glue for Hot Beds | Anti-Warp Adhesive | Fast Application

HotPoly3D New 3D Printing Products

Our Website:

www.HotPoly3D.com (Main Website) 

HotPoly3D on Amazon

Amazon.com (FusionLock Nano Adhesive 120mL - High Temperature 3D Printing Glue For Hot Beds)

Amazon.com (FusionLock Nano Adhesive 60mL Easy Apply | Fast Application)

Etsy

HotPoly3D - Etsy

TikTok

HotPoly3D (@hotpoly3d) | TikTok

@HotPoly3D

Enjoy 30 days of Hulu for FREE

Claim 10 free meals* from HelloFresh

Get 60% off Sitewide

Sip your way to stronger health with 30% off at ARMRA

Save 10% at Omnilux LED

Save 10% on Ritual Multivitamins Subscriptions

You've scored 50% OFF Factor 🤤

Join now and get 50% off a Club membership

Get your first box FREE with Curology!

Claim your $20 bonus with Acorns

Sign up for Headspace Today and get a 14 day free trial!

Get AAA membership for half the price!

Get 30¢/gal cash back on gas at major stations

Get 15% off at Equip Foods

20% Off the at FabFitFun with code INSIDER20

Get 80% off your first order when signing up to be a VIP!

Get 15% off for cleaner skin at CLEARSTEM

Get your first box FREE with Agency!

50% off + Free Shipping at Purple Carrot!

Power Up with Daily Harvest's High-Protein Smoothies

Save $100 with Gobble

Save 10% on your First Maev Order!

15% off your favorite non-alcoholic spirits at The Zero Proof

10% off JLab’s award‑winning audio gear

Get help with or without insurance. Use code SPACE80 for $80 off.

Start speaking a new language in just 3 weeks