Question 1

My Rage-Bag won’t stick.    Is it defective?

Accepted Answer

Almost never.

The Rage-Bag uses pressure-based suction.
If it’s not sticking, it’s almost always a setup or surface issue.

Suction requires an airtight seal.
No airtight seal = weak hold.

Question 2

What surfaces work best?

Accepted Answer

For strongest hold, it must be mounted on smooth, non-porous surfaces, such as:

• Glass / mirrors
• Granite / marble
• Smooth tile
• Metal

NOT RECOMMENDED for textured walls, matte paint, brick, concrete, or uneven finishes.

If the surface has texture or pores, air leaks in — and suction fails.

Question 3

What if my surface isn’t ideal?

Accepted Answer

You can use FUNPUNCH Super Suction Pads for added grip and extra stability available on our website. They’re ideal for:

• Slightly textured or difficult surfaces
• Heavy or frequent training
• Extra peace of mind

They’re optional — but they enhance stability when needed.

Question 4

What’s the correct way to attach it?

Accepted Answer

Step 1 – Clean the surface
Wipe with a dry or slightly damp cloth. Remove any dust, residue or oils.

Step 2 – Lightly damp the suction cup (optional but recommended)
A small amount of moisture helps strengthen the seal. Making it too wet causes sliding.

Step 3 –  Place the suction cup flat against the surface. Press firmly + twist to lock

Step 4 – Let it settle
Wait 1–2 minutes before heavy punching. This helps the seal settle.

Question 5

Why does it fall once I start punching?

Accepted Answer

Usually one of these:

• Surface isn’t smooth enough
• Area wasn’t cleaned properly
• Suction cup was completely dry
• It wasn’t fully secured
• You started punching immediately

When mounted correctly on the right surface, it holds solid.

FUNPUNCH

Strength isn't given, its earned.

Setup Instructions & Training Guide

Explore other Linktrees

About this account

More from Linktree